I had two plates but I lost the second one, but they look exactly alike except for the glaze. I love my little plates:). It took me a while to get back into making plates but it was easier than I remember. The plates are both very smooth and very cemetrical. The glaze on this plate is a little uneven but I think it's because I used a brush that had multiple rubber bristles instead of a regular one. The second plate I made had a green glaze that didn't turn out for some reason. The glaze didn't give the plate a shine or a smooth feeling but it showed off the designs I did on the lip unlike this one.
0 Comments
This is an extra project I did. This bowl is rather large, and for the most part centered. The bowl is pretty tall and very smooth which makes me happy:). The glaze didn't turn out at all on the outside. To apply the glaze I dipped the bowl in one half at a time and for some reason it came out way too thick and on one part of the bowl didn't have any glaze on it at all even though I dipped it in the glaze. On the inside of the bowl I had a base of the blue that's on the outside then I poured different color glazes on the inside and moved the bowl around in the direction that I wanted the glaze to go.
this is my set of three. For my set of three I did shorter vauses with a small neck. I honestly love these three peices when they're all sitting next to each other they don't necessarily look alike but they look like they go together well. On the green one it wasn't perfectly centered but I feel like the number 7 tool helped with that. The glaze wasn't thick enough when i applied it but it looks ok. The two toned cause is probably my favorite because of the cemetery from the two colors. The neck could've been pulled up taller but when I went to do it, the neck started to sink into the vause but I still like the shape of it. The taller vause wasn't thrown quite centered so I struggled when it came to pulling it evenly. But the glaze on it is pretty cool because I first applied the base layer of blues no then the stripes. The striped are a turquoise and the green stripe is actually the orange glaze that's on the smaller vause.
This is my team Franken pot. It is a little off centered due to working with people who are new to ceramics. But over all it's good. I made the base and attached all of the peices. I also worked on shaping it and using the number 7 tool to shave down some of the base. The glaze is a little splotchy but it works for this piece. After I footed this piece I pressed in the little shapes on the bottom.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |